OK Canon PIXMA PRO-10 Wireless Setup - CanonApps.com - Canon Supports

Canon PIXMA PRO-10 Wireless Setup


How to Canon PIXMA PRO-10 Wireless Setup

Canon PIXMA PRO-10 Wireless Setup
Canon PIXMA PRO-10


Directions on the most proficient method to setup the remote association on your PIXMA PRO-10 printer and furthermore how to reset the printer to processing plant settings.  Some get to focuses (at times alluded to as switches or centers) highlight a programmed association catch marked "WPS" which remains for Wi-Fi Protected Setup.

This permits allowed gadgets, for example, your PIXMA PRO-10 to associate with your system without expecting to enter a secret key and it empowers a snappy and simple technique for interfacing your gadgets.  This technique is by a long shot the most straightforward method for interfacing your PIXMA PRO-10, so if your get to point has a WPS catch please select the 'WPS Connection Method' tab beneath for guidelines on associating utilizing this strategy.

On the off chance that your switch does not bolster WPS we have given option guidelines to get your PIXMA PRO-10 associated so please select the 'Standard Connection Method' tab beneath. 

Canon PIXMA PRO-10 WPS Connection Method

Before we begin, there are a few conditions that must be met with a specific end goal to utilize the WPS push catch strategy:

The get to point must have a physical WPS push catch accessible. If it's not too much trouble check with your gadget's client control for points of interest.  In the event that the WPS push catch is not accessible please utilize the directions on the Standard Connection Method tab.

Your system must be utilizing the WPA (Wi-Fi Protected Access) or WPA2 security convention. Most WPS empowered get to focuses utilize this convention.

Step 1  
  • Ensure that the printer is turned on.
  • Press and hold the [Wi-Fi [MASTER] Picture_PIXMA Wireless Connection Setup Page step1-WIFI ] catch on the front of the printer for a few moments.

Step 2  
  • Ensure that this catch begins to blaze blue and afterward go to your get to point and press the [WPS] catch inside 2 minutes.

For correct insights with respect to squeezing the WPS catch, please allude to the get to point manual.

The (blue) Wi-Fi light on the printer will keep flashing while at the same time looking for, or interfacing with the get to point. At the point when the printer has effectively made an association with your remote system, the blue light will quit blazing and stay lit.

Arrange settings affirmation
To affirm that your printer is effectively associated with your remote system, you can print out the system settings of your printer in the event that you wish:
  •  Ensure that your printer is turned on.
  • Stack a sheet of A4 or Letter-sized plain paper. 
  • Press and hold the [Resume/Cancel [MASTER] Picture_PIXMA Wireless Connection Setup Page step1-Resume/Cancel ] catch until the power light flashes 6 times, and afterward discharge it. The system data page will be printed.

When alluding to the printout, watch that the "Association" specifies "Dynamic" and that the SSID - Service Set Identifier (the name of your remote system) shows the right name of your remote system.

Canon PIXMA PRO-10 This closes the WPS setup system.

Please now continue by introducing the product to make the most out of your PIXMA PRO-10.

On the off chance that you don't have the establishment CD that accompanied your item, you can download the manuals and programming by choosing your item from the PIXMA go page.

On the off chance that the remote setup is as yet bombing subsequent to taking after this guide, please get in touch with us for further help.

Canon PIXMA PRO-10 Standard USB Connection Method


Step 1
  • Embed the CD that accompanied your printer and run the setup.

Windows Users – If the "Setup CD-ROM" does not autorun, embed the CD-ROM into the PC again and tap on [My Computer], select the CD-ROM and double tap [MSETUP4.EXE].

Windows 8 clients - double tap [Canon_IJ]. At the point when the determination window opens, double tap the [MSETUP4.EXE].

Macintosh Users – Double-tap the [Canon_IJ] symbol mounted on your desktop. At the point when the choice window opens, click [SETUP] to begin the product download connect.

In the event that you don't have the establishment CD that accompanied your item, you can download the manuals and programming by choosing your item from the PIXMA run page.
  • At the point when the underlying screen shows up, tap on [Next].

If it's not too much trouble take note of: Some models that are likewise outfitted with a wired system association, may have an extra screen requesting that you select between a USB or Network association. On the off chance that you see this screen, please select [Network Connection].
  • Select [Wireless Connection] as an association strategy.
  • Guarantee that your printer is turned on, ensure the power light is on and after that snap [Next].

Step 2
  • Tap on [Connect to the network].
  • At the point when the accompanying screen shows up, tap on [Wireless Setup Using the USB Cable]. 
  • At the point when the accompanying screen shows up, select your district, and afterward tap on [Next]. 
  • At the point when the accompanying screen shows up, select your dialect, and afterward tap on [Next]. 
  • At the point when the accompanying screen shows up, select the product you wish to introduce, and afterward tap on [Next]. In case you don't know which programming you need to introduce at this stage, don't stress, as you can simply uninstall it at a later stage in the event that you wish.
  • At the point when the accompanying screen shows up, tap on [Yes] to consent to the end client permit assention.

<Windows clients only>
At the point when the accompanying screen shows up, tap on [Next]
  • At the point when the accompanying screen shows up, tap on [Next].

Windows UsersMac Users

Step 3
  • At the point when the accompanying screen shows up, associate your printer to your PC utilizing the provided USB link. This is the link with the[MASTER] Picture_PIXMA Wireless Connection Setup Page tab 2_12symbol on the connector. WindowsMac
(For Mac clients, click [Next]).
  • Once your printer has been identified, the accompanying screen will show up. The name of the get to point that your PC is associated with will be shown (where "xxxxxxxxxxxxx" is appeared). On the off chance that this is the remote system you need your printer to interface with, tap on [Yes]. WindowsMac 
<For Mac clients only>
At the point when the accompanying screen shows up, snap [Allow]. 
  • At the point when the accompanying screen shows up, detach your printer from your PC and snap [Next]. WindowsMac
  • The accompanying screen shows the model of your printer and the name (or SSID) of your remote system. WindowsMac

Click [Complete]. Click [OK].
This finishes up the Windows setup

<For Mac clients only>
At the point when the accompanying screen shows up, snap [Add Printer].

In the accompanying screen, select the Canon IJ Network driver form and snap [Add].

On the off chance that the remote setup is as yet bombing in the wake of taking after this guide, please get in touch with us for further help.

You might also like:

Subscribe to receive free email updates: